Find suitable spare parts or accessories to your Einhell products.
CC-BC 4 M
The Einhell CC-BC 4 M Battery Charger is an intelligent battery-charger device adapted to the technically highly developed, high-performance batteries found in modern vehicles. The intelligent, micro-processor controlled unit is suitable for a wide range of vehicle battery types and comes with a variety of technical safety and maintenance mechanisms. The main focus of development has been on fast, battery-friendly charging, that allows the longest possible lifetime with full performance to be achieved. Operating the charger is more straightforward than with conventional devices thanks to a detailed charge status display. This Einhell all-rounder is suitable for gel batteries, AGM batteries and maintenance-free and low-maintenance lead-acid batteries. The CC-BC 4 M adapts automatically to the battery voltage of 6V and 12V vehicles. The multi-stage charging cycle of the Einhell Battery Charger is automatically monitored and adjusted by the micro-processor controller. The smart control electronics analyze the type and condition of the connected battery, and initiates the most appropriate charging mode to suit what is required. The trickle charge function protects and conserves the battery for a continuously optimum charge level. This makes the CC-BC 4 M suitable for all types of vehicle, particularly seasonal vehicles with long laidup times. Instead of allowing the battery to slowly discharge fully and risking an exhaustive discharge as a result, the battery is kept topped up to its optimum level using trickle charging. The trickle charge relieves the battery cells and extends working life, preventing avoidable, cost-intensive replacement of a defective vehicle battery. Cars, motorbikes and scooters are immediately ready for use at the start of the season. A winter charging mode has been specially developed for outside temperatures below 5° Celsius. Automatic over-charge, short circuit and reverse polarity protection prevents damage to both charger and battery. The Battery Charger is also protection class IP 65-compliant, meaning that it is protected against dust and splash water. The LCD battery voltage and charge status display shows at a glance the current state of the battery and the mode in which the charger is operating. The unit can differentiate between four charging levels and indicate whether a 6- or 12-volt battery is connected. The display on the Einhell Battery Charger also indicates if the clamps have been incorrectly attached, while a warning light alerts the user to possible problems immediately. Thanks to its fully-insulated clamps, the Einhell Battery Charger can be connected easily and safely. The unit also comes with an integrated wall bracket for ease of use and practical storage.
|Mains supply||220-240 V | 50 Hz|
|Charging voltage||6 V/ 12V|
|Charging current Min. (arith./eff.) - Max. (arith./eff.) on 6 V d.c.||2 / [-] A|
|Charging current Min. (arith./eff.) - Max. (arith./eff.) on 12 V d.c.||2 / [-] - 4 / [-] A|
Product was added to the comparison list.Open comparison list