einhell-car-classic-battery-charger-1002221-productimage-101
einhell-car-classic-battery-charger-1002221-detail_image-101
einhell-car-classic-battery-charger-1002221-detail_image-102
einhell-car-classic-battery-charger-1002221-detail_image-103
einhell-car-classic-battery-charger-1002221-detail_image-104
einhell-car-classic-battery-charger-1002221-productimage-101
einhell-car-classic-battery-charger-1002221-detail_image-101
einhell-car-classic-battery-charger-1002221-detail_image-102
einhell-car-classic-battery-charger-1002221-detail_image-103
einhell-car-classic-battery-charger-1002221-detail_image-104
Battery Charger

CC-BC 4 M

Item no.: 1002221 EAN: 4006825614275
  • Intelligent battery charger with microprocessor controller
  • Multi-step charging cycle, contr. and monitored by microprocessor
  • Universal battery charger for various battery types such as:
  • Gel, AGM, zero and low maintenance lead-acid batteries, etc...
  • Automatic battery voltage adjustment for 6/12V vehicles
  • Protection type: IP65 (protected against dust and splash water)
  • Trickle charge function for a continuously ideal charge status
  • Optimal for season.vehicles with long idle times(convert./m-bike)
  • Use will extend the life of the battery
  • Winter charging mode for outdoor temperatures below 5°C
  • Display: LCD battery voltage and charging progress display
  • Rescue function for exhausted batteries
  • Electr. protec. against overcharging, short-circuit&swapped poles
  • Totally insulated battery terminals and integrated wall bracket
See more information
einhell-car-classic-battery-charger-1002221-productimage-101
Article description

The Einhell CC-BC 4 M Battery Charger is an intelligent battery-charger device adapted to the technically highly developed, high-performance batteries found in modern vehicles. The intelligent, micro-processor controlled unit is suitable for a wide range of vehicle battery types and comes with a variety of technical safety and maintenance mechanisms. The main focus of development has been on fast, battery-friendly charging, that allows the longest possible lifetime with full performance to be achieved. Operating the charger is more straightforward than with conventional devices thanks to a detailed charge status display. This Einhell all-rounder is suitable for gel batteries, AGM batteries and maintenance-free and low-maintenance lead-acid batteries. The CC-BC 4 M adapts automatically to the battery voltage of 6V and 12V vehicles. The multi-stage charging cycle of the Einhell Battery Charger is automatically monitored and adjusted by the micro-processor controller. The smart control electronics analyze the type and condition of the connected battery, and initiates the most appropriate charging mode to suit what is required. The trickle charge function protects and conserves the battery for a continuously optimum charge level. This makes the CC-BC 4 M suitable for all types of vehicle, particularly seasonal vehicles with long laidup times. Instead of allowing the battery to slowly discharge fully and risking an exhaustive discharge as a result, the battery is kept topped up to its optimum level using trickle charging. The trickle charge relieves the battery cells and extends working life, preventing avoidable, cost-intensive replacement of a defective vehicle battery. Cars, motorbikes and scooters are immediately ready for use at the start of the season. A winter charging mode has been specially developed for outside temperatures below 5° Celsius. Automatic over-charge, short circuit and reverse polarity protection prevents damage to both charger and battery. The Battery Charger is also protection class IP 65-compliant, meaning that it is protected against dust and splash water. The LCD battery voltage and charge status display shows at a glance the current state of the battery and the mode in which the charger is operating. The unit can differentiate between four charging levels and indicate whether a 6- or 12-volt battery is connected. The display on the Einhell Battery Charger also indicates if the clamps have been incorrectly attached, while a warning light alerts the user to possible problems immediately. Thanks to its fully-insulated clamps, the Einhell Battery Charger can be connected easily and safely. The unit also comes with an integrated wall bracket for ease of use and practical storage.

Technical details

Mains supply220-240 V | 50 Hz
Charging voltage6 V/ 12V
Charging current Min. (arith./eff.) - Max. (arith./eff.) on 6 V d.c.2 / [-] A
Charging current Min. (arith./eff.) - Max. (arith./eff.) on 12 V d.c.2 / [-] - 4 / [-] A
Einhell customer service can be reached directly. We take care of your requests for product information, spare parts and repairs.We support you with all questions around your product - before, during and after the purchase.

Customer reviews

Einhell does not ensure - with the exception of the "Verified Purchase" cases - that the published reviews come from such consumers who have actually used or purchased the products.